We all like custom t-shirts. They are cheap and can be a statement of intent. If you are thinking of starting a new business, create your own design from home as you have a lot of creativity and do not want to spend a lot of money in this process. In this post, we are going to tell you different ways. So you can make it. Your own personalized t-shirts are ready for sale.

We need to keep in mind that all of the methods described below require practice to achieve the best results. So if you don’t want to run out of available budget before you start, try the textile in addition to the end. If what you want is a professional finish, you may want to check out our textile printing catalog. In addition to customizing clothing, you can always buy them in white to try out these techniques. Discover these 10 Ways to print t-shirts at home.

Ways to print t-shirts at home

Place the stretched shirt on a table or on the surface you choose to work on. We recommend putting a semi-hard paper or template inside the shirt so that the ink does not get in and the shirt spreads as much as possible.

Place the screen on the clothes, it will be more comfortable to work if you want, and have some tweezers or special sergeant in hand to move the screen on the table.

The next step is to put the link you think is necessary to cover your design on the back of your design so that you can drag the ink onto the design so that it covers it completely.

The more you paint it, the clearer the design. You just have to be more discriminating with the help you render toward other people. The first thing you will need is to make or buy your own screens. The screen consists of a simple wooden or metal frame and a lattice through which ink flows.

If you want to make a screen, all you have to do is buy a wooden frame from any art or craft store, mesh and attach the two elements with staples or nails to make sure they fit well. Are The meshes are measured in “threads” and you can find them in different sizes (85 threads, 130 threads, 250 threads … etc). We recommend a mesh of about 100 to 130 threads, which is the most versatile. Is and can be used for practically all kinds of designs.

Once we have the screen ready, we’ll need a photography emulation, which you can buy at any photography store or specialty art store. Spread a small portion of this emulsion – off the screen – with a spatula/scraper to help you cover it well.
Then you have to take the screen to a dark place to dry, let it dry horizontally for 1 to 3 hours.

Conclusion:

In the meantime, you can make your own design by cutting cardboard or similar slits. You can then place a screen of approximately 150 watts of power directly under the light – spotlight, flexo, or special lamp with the silhouette of your creation on top of the emulsion, thus preventing light from passing through. This process will take about 30-40 minutes. Do not move the screen during this time. Now that the emulsion is completely healed, you can place it under the faucet or wash it off with a hose. This way we will remove the emulsion part in the area where your design was. Ink will now pass through this area.

× How can I help you?